open source website creator

RASPADO

OC – CSIV – W2

MOLDEX 1.0

Stamped concrete 1 cm 

  • DESCRIPTION - Product made from cement, selected aggregates and additives ready to be mixed with water and, by applying stamps, achieving a perfect imitation of natural stone, tile, cobblestones, slate stone,herringbone brick, hexagonal stone,etc.
  • CHARACTERISTICS - Appearance: coloured powder. pH: 9-10 . Density of the product in powder form: 1310 Kg/m3 . Density of the product in paste form: 2093 Kg/m3 Density of the set product: 1745 Kg/m3 . Theoretical yield: 1,8 Kg/m2 y mm. Mixing water: 17% Set time: 15 minutos. Aggregate size: 0,7 mm
  • HOW TO USE - The product, previously mixed with 17% water, is applied to the surface that must be treated. The surface would be smoothed with a steel trowel. It should be kept in mind that the set time of Moldex 1.0 is 15 minutes. Wait for the surface shine from the water to disappear and then apply the Truccsa DECAPOW (powder release agent) so that it is well-covered. Next, inmediately apply the stamps, pressing them evenly on the substrate until the desired textured is achieved. The next day, eliminate the powder release agent and apply Truccsa IMPER W (water-based finishing liquid).
  • COLOUR RANGE - We currently have a range of 36 colours available. Special colours are available on request.
  • SUBSTRATES - Concrete, stamped concrete(MOLDEX)
  • CONSERVATION - Store in a dry place.
  • STORAGE - Shelf life is approximately 6 months from date of manufacture if stored in unopened original packing in dry conditions.
  • PACKAGING - 25 kgs. 3 ply paper-plastic-paper sacks. Shrink-wrapped pallets of 1.400 kg.(56 sacks)
Mobirise

CERTIFICATES

Mobirise
Mobirise
Mobirise
Mobirise
Mobirise
Mobirise
Mobirise
Mobirise
Mobirise
Mobirise