DESCRIPTION - Cementitious adhesive with good workability, for laying ceramic tiles and floors inside and outside. Suitable for laying ceramic tiles with a medium-high absorption rate.
CHARACTERISTICS - Adhesive suitable for indoor and outdoor flooring. Special ceramic placement absorption medium-high. A good adherence product and non slip
HOW TO USE - Mix the product with 25% water, manually or with a low-speed electric mixer (500rpm) until a homogenous blend is achieved. Let the mix to stand for a few minutes and then stir the mix before applying. Spread the mix with a notched trowel (see the notched-trowel panel) in a maximum surface of 2 m2, because, the shorter the time between the spreading of the mix and the laying of the tiles, the higher will be the adhesion. Lay the tiles onto the adhesive and ensure that a firm pressure is applied to achieve good contact with the adhesive. Special care must be given to all construction joints (expansion, contraction and perimeter corner joints) as well as to the joints between the cement slabs (minimum 2 mm.) On floor areas larger than 30 m2, leave partition joints. On interior floorings larger than 15 m2, leave perimeter joint between the floor and the wall or pillar. Joints must be grouted after 24 hours on vertical surfaces and after 48 hours on floorings.
COLOUR - White and grey.
SUBSTRATES- Conventional Supports in walls and floors inner and outer.
CONSERVATION- Store in a dry place.
STORAGE- Shelf life is approximately 12 months from date of manufacture if stored in unopened original packing in dry conditions.